cobra borate rods
cobra_borate_rodscobra borate rodscobrarods

Cobra – Borate Rods

£45.10

Cobra™ Borate Rods are a great way to spot treat decay prone areas such as log ends that are already coated with a finish.

Once inserted into damp or wet wood the borate / copper complex in Cobra Borate Rods dissolve spreading the active ingredients into areas surrounding the rod. This eliminates active decay fungi and helps prevent rot for 8 to 10 years.

Product Description

Cobra™ Borate Rods are a great way to spot treat decay prone areas such as log ends that are already coated with a finish.

Once inserted into damp or wet wood the borate / copper complex in Cobra Borate Rods dissolve spreading the active ingredients into areas surrounding the rod. This eliminates active decay fungi and helps prevent rot for 8 to 10 years.

Cobra Rods are 7/16″ in diameter and are two inches in length. A 1/2″ diameter drill bit is used for installation. The installation holes may be plugged with the accompanying plastic plugs or with Energy Seal.

A typical six to eight inch round log end will require two 2” long Cobra Borate Rods inserted within 4 inches of the butt end.

Features & Statistics

cobra_rods1 cobra_rods2 cobra_rods3 cobra_rods4
Use a ½” drill bit to drill hole. Drill hole to a depth of at least 3 ¾”. Clean out the hole and insert the Cobra Rod. Insert the plastic plug into the hole.
cobra_rods5 cobra_rods6 cobra_rods7 cobra_rods8
Using a screw driver twist the plug clockwise. Make sure the top of the plug sets about ¼” below the surface of the wood. Fill the hole with appropriately colored Energy Seal. Smooth with tool or finger. After a few hours the Energy Seal may be stained to match the surrounding area.

Reviews

There are no reviews yet.

Be the first to review “Cobra – Borate Rods”

TOP