Cobra™ Borate Rods are a great way to spot treat decay prone areas such as log ends that are already coated with a finish.
Once inserted into damp or wet wood the borate / copper complex in Cobra Borate Rods dissolve spreading the active ingredients into areas surrounding the rod. This eliminates active decay fungi and helps prevent rot for 8 to 10 years.
Cobra Rods are 7/16″ in diameter and are two inches in length. A 1/2″ diameter drill bit is used for installation. The installation holes may be plugged with the accompanying plastic plugs or with Energy Seal.
A typical six to eight inch round log end will require two 2” long Cobra Borate Rods inserted within 4 inches of the butt end.
Features & Statistics
- Great for ground-contact wood
- Product Label
|Use a ½” drill bit to drill hole.||Drill hole to a depth of at least 3 ¾”.||Clean out the hole and insert the Cobra Rod.||Insert the plastic plug into the hole.|
|Using a screw driver twist the plug clockwise.||Make sure the top of the plug sets about ¼” below the surface of the wood.||Fill the hole with appropriately colored Energy Seal.||Smooth with tool or finger. After a few hours the Energy Seal may be stained to match the surrounding area.|